wear resistant ceramic adhesiv > abrasion resistant epoxy compound ceramic tile adhesive

abrasion resistant epoxy compound ceramic tile adhesive

BD241 high temperature anti abrasion wearing resistant repair epoxy compound ceramic adhesives

Performance features of our BD241 anti wear abrasion resistant ceramic tile bonding adhesive epoxy compound:
1. It's consist of modified toughening heat resistant resin and the special curing agent
2. Aging resistant,high temperature resistant,medium resistant,good toughness
3. Can cure at room temperature,can also heat for curing.
4. The highest working temperature is 240 degree,when it is used as the repair agent.The highest working temperature is 220 degree,
when it is used as the structural bonding.

Product usage of our BD241 wearing abrasion high temperature resistant repair compound ceramic adhesives:
With high bonding strength and good toughness,suitable for the bonding of metal,ceramic,cement and glass.Used in the bonding of
abrasion wearing resistant ceramic tile under the temperature of 220 degree working condition,also suitable for the bonding and
repairing of machine part under high temperature high strength working condition.

Performance index:

Product name	physical state	Standard packing	Operation time limit (25℃)	Usable time (25℃)	Range of application
BD241 high temperature anti wear abrasion ceramic adhesive	paste	30kg	1h	12h	With very high bonding force to steel,cement,ceramic,aluminum alloy,stainless steel etc.various materials,especially suitable for the paste of wear resistant ceramic chip on the surface of the equipment which suffered larger impact under 240℃

Item model	Color	Density (g/cm³)	shear strength (Mpa) GB7124-2008	impact strength (J/cm²) GB6328-1999	tensile strength (Mpa) GB6329-1999	Compressive strength (Mpa) GB1041-2008	Working temperature （℃）
BD241	white	1.27	20	120	91	96	-60-240

How to use：
1.Surface treatment:
Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,finally clean it by cleaning agent
and dry it by the airing.

2.The preparation of high temperature anti wear abrasion cermaic tile bonding repair epoxy adhesive
According to the mass ratio A:B=2:1,make A and B two component mix uniformly,when the temperature is low in winter,can preheat
the A component first.

3.Using adhesive:
Make the configured adhesive be coating on the adherend surface uniformly,double spread will get the better bonding effect.

4.Curing:
Initial curing will take 2 hours at room temperature,complete curing will take 24 hours at room temperature,heat it up to the temperature
of 80 degree and keep this temperature for 2 hours,then do the post curing,in this way,can get the higher strength(≥23MPa).
When the temperature is below 15 degree,the curing speed of the adhesive layers is slow,the curing is not complete,need heating it up
to the temperature of 60-80 degree and keeping this temperature for 2 hours after the adhesive layers initial curing(Bake it with the
iodine tungsten lamp or heat it with hair dryer etc. heating measures)

Packing specification:
1.Our common packaging:Two-component,30Kg/group,packed A component in a iron drum,packed B component in a palstic drum,
A component: 20Kg/drum, B component: 10Kg/drum.
2.We could offer you professional customized packaging and subpackage services based on users' requirements

Transportation storage:
Sealed storage in the cool and dry place.The warranty period is 12 months.Avoid placing it upside down,knocking against and
transporting it as a non-dangerous product during transportation.

Special version:
1.This parameter is for laboratory conditions,due to the actual working condition is more complex,suggest the users to do the
pretest according to actual working condition.

2.When the environment temperature is below 15 degree,the curing time will prolong,should take proper heating measure.

3.When the environment temperature is more than 25 degree or the mixing quantity is too large,the curing speed will expedite,
should properly shorten the application time of coating after mixing.

Construction protective measures:
1.Wear the protective masks,wear the protective glasses and rubber gloves
2.Need washing hands with soap before eating,drinking or smoking.
3.The health hazard after touching: a few people will have skin allergy phenomenon,see a doctor in time and avoid touching with
this product again.should wipe it with ethyl acetate when the sizing material paste on the skin by careless,then wash it with clear water.
Should wash it with clear water immediately and see a doctor when splashing into the eyes by careless.

Warm Prompt:
Residual adhesive solution cured products are non-toxic harmless organic solid,but maybe it will produce poisonous gas when
burning,non-professional personnel can not do combustion disposal,should be sent to garbage power plant or garbage burning
place treatment.

fire prevention measures:
Should choose dry powder to extinguish fire,can cover and flap it with dry powder,grit(the construction using abrasive) or
the non chemical fiber fabric when the sizing material catching fire.

Product packaging actual photo of BD241 high temperature wearing abrasion resistant ceramic tile epoxy adhesive:



Product construction application photos of BD241 wear abrasion high temperature resistant ceramic adhesive:

------分隔线----------------------------